Items:, Value:
Quick search
Online Catalogue
:
Turntables / Phono Stages / Cartridges
:
Cartridges - New
:
MM Cartridges - click here
ORTOFON OM3 MM
Ortofon HiFi OM3E
Price Guide: £20
TECHNICAL DATA
OM 3 E
Output voltage at 1000 Hz,
5cm/sec.
4 mV
Channel balance at 1 kHz
2 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-22.000 Hz
Frequency response
20-18.000 Hz + 2 / - 3 dB
FIM distortion at recommended
tracking force, DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
60 µm
Compliance, dynamic, lateral
20 µm/mN
Stylus type
Elliptical
Stylus tip radius
r/R 8/18 µm
Equivalent stylus tip mass
0,5 mg
Tracking force range
1,5-2,0 g (15-20 mN)
Tracking force, recommended
1,75 g (17,5 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Black/Black
Cartridge weight
5 g
Replacement stylus unit
Stylus 3 E
NORMALLY IN STOCK!!!!!
Price:
£20.00
Ortofon HiFi OM5E (1/2 inch or P mount)
Ortofon HiFi OM5E (1/2 inch or P mount)
Price Guide: £25
TECHNICAL DATA
OMP 5 E
Output voltage at 1000 Hz,
5cm/sec.
4 mV
Channel balance at 1 kHz
2 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-25.000 Hz
Frequency response
20-20.000 Hz ± 2 dB
FIM distortion at recommended
tracking force, DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
55 µm
Compliance, dynamic, lateral
20 µm/mN
Stylus type
Elliptical
Stylus tip radius
r/R 8/18 µm
Equivalent stylus tip mass
0,5 mg
Tracking force range
1,25-2,0 g (12,5-20,0 mN)
Tracking force, recommended
1,25 g (12,5 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Black/Black
Cartridge weight
6 g
Replacement stylus unit
Stylus 5 E
TECHNICAL DATA
OM 5 E
Output voltage at 1000 Hz,
5cm/sec.
4 mV
Channel balance at 1 kHz
2 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-25.000 Hz
Frequency response
20-20.000 Hz ± 2 dB
FIM distortion at recommended
tracking force, DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
65 µm
Compliance, dynamic, lateral
20 µm/mN
Stylus type
Elliptical
Stylus tip radius
r/R 8/18 µm
Equivalent stylus tip mass
0,5 mg
Tracking force range
1,5-2,0 g (15-20 mN)
Tracking force, recommended
1,75 g (17,5 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Black/Black
Cartridge weight
5 g
Replacement stylus unit
Stylus 5 E
Normally in stock!!!!!!!
Price:
£25.00
Ortofon HiFi 2M Red
Ortofon HiFi 2M Red
Price Guide: £60
About the unique 2M design
2M is developed together with the Danish designer "MøllerJensen Design" from Copenhagen, Denmark - the same designer who designed the award winning cartridge MC Jubilee and the Kontrapunktseries.
The inspiration for designing the 2M was related to the facets of the diamond - elegantly concentrating its contours against the grooves on the record surface.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
We are using the same names on our 2M series as we use at our Rondo series: Red, Blue and Bronze. The 2M Black will become the flagship of 2M.
2M was the last product of our former chief engineer Per Windfield. He has worked with the 2M for the last two years.
The 2M technology
Both the 2M Red and 2M Blue have diamonds which are polished to the highest standards of the industry. 2M Red has a tipped elliptical diamond and the 2M Blue has a nude elliptical diamond.
We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
2M Red and 2M Blue has interchangeable stylus units and replacement stylus is available.
2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound.
To obtain a flat frequency response as with a Moving Coil cartridge we are using the slit pole pins to reduce the eddy current. The slit pole pins is an Ortofon invention which was presented in the 500 series and the Super OM series.
The 2M Red and 2M Blue both have the same engine with slit pole pins. With this improved engine we have been able to increase to output to 5,5 mV.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red
Price:
£59.00
Ortofon HiFi 2M Blue
Ortofon HiFi 2M Blue
Price Guide: £100
About the unique 2M design
2M is developed together with the Danish designer "MøllerJensen Design" from Copenhagen, Denmark - the same designer who designed the award winning cartridge MC Jubilee and the Kontrapunktseries.
The inspiration for designing the 2M was related to the facets of the diamond - elegantly concentrating its contours against the grooves on the record surface.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
We are using the same names on our 2M series as we use at our Rondo series: Red, Blue and Bronze. The 2M Black will become the flagship of 2M.
2M was the last product of our former chief engineer Per Windfield. He has worked with the 2M for the last two years.
The 2M technology
Both the 2M Red and 2M Blue have diamonds which are polished to the highest standards of the industry. 2M Red has a tipped elliptical diamond and the 2M Blue has a nude elliptical diamond.
We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
2M Red and 2M Blue has interchangeable stylus units and replacement stylus is available.
2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound.
To obtain a flat frequency response as with a Moving Coil cartridge we are using the slit pole pins to reduce the eddy current. The slit pole pins is an Ortofon invention which was presented in the 500 series and the Super OM series.
The 2M Red and 2M Blue both have the same engine with slit pole pins. With this improved engine we have been able to increase to output to 5,5 mV.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 25 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Nude Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Blue
Cartridge weight 7,2 g
Replacement stylus unit 2M Blue
Price:
£99.00
Ortofon HiFi 2M Bronze
Ortofon HiFi 2M Bronze
Price Guide: £200
About the unique 2M design
2M is developed together with the Danish designer "MøllerJensen Design" from Copenhagen, Denmark - the same designer who designed the award winning cartridge MC Jubilee and the Kontrapunktseries.
The inspiration for designing the 2M was related to the facets of the diamond - elegantly concentrating its contours against the grooves on the record surface.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
We are using the same names on our 2M series as we use at our Rondo series: Red, Blue and Bronze. The 2M Black will become the flagship of 2M.
2M was the last product of our former chief engineer Per Windfield. He has worked with the 2M for the last two years.
The 2M technology
Both the 2M Red and 2M Blue have diamonds which are polished to the highest standards of the industry. 2M Red has a tipped elliptical diamond and the 2M Blue has a nude elliptical diamond.
We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
2M Red and 2M Blue has interchangeable stylus units and replacement stylus is available.
2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound.
To obtain a flat frequency response as with a Moving Coil cartridge we are using the slit pole pins to reduce the eddy current. The slit pole pins is an Ortofon invention which was presented in the 500 series and the Super OM series.
The 2M Red and 2M Blue both have the same engine with slit pole pins. With this improved engine we have been able to increase to output to 5,5 mV.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight 7,2 g
Replacement stylus unit 2M Bronze
Price:
£199.00
Ortofon HiFi 2M Black
Ortofon HiFi 2M Black
Price Guide: £350
About the unique 2M design
2M is developed together with the Danish designer "MøllerJensen Design" from Copenhagen, Denmark - the same designer who designed the award winning cartridge MC Jubilee and the Kontrapunktseries.
The inspiration for designing the 2M was related to the facets of the diamond - elegantly concentrating its contours against the grooves on the record surface.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
We are using the same names on our 2M series as we use at our Rondo series: Red, Blue and Bronze. The 2M Black will become the flagship of 2M.
2M was the last product of our former chief engineer Per Windfield. He has worked with the 2M for the last two years.
The 2M technology
Both the 2M Red and 2M Blue have diamonds which are polished to the highest standards of the industry. 2M Red has a tipped elliptical diamond and the 2M Blue has a nude elliptical diamond.
We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
2M Red and 2M Blue has interchangeable stylus units and replacement stylus is available.
2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound.
To obtain a flat frequency response as with a Moving Coil cartridge we are using the slit pole pins to reduce the eddy current. The slit pole pins is an Ortofon invention which was presented in the 500 series and the Super OM series.
The 2M Red and 2M Blue both have the same engine with slit pole pins. With this improved engine we have been able to increase to output to 5,5 mV.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-31.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Shibata
Stylus tip radius r/R 6/50 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 7,2 g
Replacement stylus unit 2M Black
Price:
£349.00
Goldring 1006 MM
1006
The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an Elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.
Normally in stock!!!!!!
Price:
£95.00
Goldring Elektra MM
Elektra
The Elektra is a low-cost moving magnet phono cartridge which incorporates several audiophile features. Tracking ability is excellent and this cartridge uses an Elliptical stylus tip. The low-mass cantilever assembly has a surprisingly wide ranging compatibility with the best tonearms and turntables available.
The Elektra comes fitted as standard on our new turntable, the GR1.
Replacement styli:
D152E stylus
Normally in stock!!!!!!
Price:
£34.00
Goldring 1022 GX MM
1022GX
The 1022GX is recommended for the discerning listener. The diamond stylus is a Gyger-1 fine line-contact type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.
Normally in stock!!!!!!!!
Price:
£165.00
Online Catalogue
:
Turntables / Phono Stages / Cartridges
:
Cartridges - New
:
MM Cartridges - click here
